Thermal Shock Chamber – Russells Technical Products Model TSV-9-30-30-LN2

  • Two zone vertical, approximately 0.63 x 0.63 x 0.63 m (25 x 25 x 25 in) carrier.
  • Cold chamber:  -73°C to +177°C (-100°F to +350°F). Liquid nitrogen capable.
  • Hot chamber: ambient to +200°C (392°F).

Walk-in Temperature/Humidity Chamber – Russells Technical Products Model WMD-768-30-30.

  • Approximately 2.4 x 2.4 x 3.6 m (8 x 8 x 12 ft) inside dimension.
  • Temperature: -73°C to +85°C (-100°F to +185°F) with 5°C (9°F) change rate.
  • Humidity: 20% to 95% rh.

Temperature/Altitude Chamber – Russells Technical Products Model RHD-35-705-705.

  • Approximately 1 x 1 x 1 m (39 x 39 x 39 in) inside dimension.
  • Temperature:  -73°C to +177°C (-100°F to +350°F ).
  • Humidity: 20% to 95% rh.
  • Altitude: ambient to 24390 m at 610 m/min (80,000 ft at 2000 ft/min).
  • Rapid decompression with secondary chamber:  3050 - 12200 m (10,000 ft to 40,000 ft) in under 10 sec.
  • Explosive decompression from 2,438 to 12,192 m (8,000 ft to 40,000 ft) under 100 msec.

Electrodynamic Shaker – Ling Dynamics Systems Model V894-1220C

  • 5455 kgf (12,000 lbf) rms, 5 cm (2.0 in) pk-pk displacement; 100 g.
  • 2 to 2000 Hz; Integral 1.2 x 1.2 m (48 x 48 in) slip table.
  • 1.2 x 1.2 m (48 x 48 in) head expander.

Vibration Control System – Ling Dynamic Systems Dactron, Model:  LAS-200.

  • With capability for sine, random, mixed mode, classical shock, and shock response spectrum.
  • Up to eight channels for control and response.

Mechanical Shock Tester – M-RAD, Model 2424(550) pa-mp with M-Rad Model 1200S shock Analysis Control System.

  • Accelerated platform drop type shock machine, 250 kg (550 lb) maximum payload capacity (half sine, sawtooth, & square pulse shapes).
  • Pulse durations from 0.5 to 50 msec. Up to to 1,000 g.

Navy High Impact Shock Hammer.

  • Custom fabricated for ESL Technology Inc. by Crooks Mechanical to Buships Dwg No. 10-T-2145-L.
  • Meets MIL-S-901D and CFTO D-03-003-007/SF-000 for lightweight equipment up to 114 kg (250 lb).


Salt Fog Cabinets

  • Englehard Harshaw Model 23G-003 Approximately 1.8 x 0.9 x 1.22 m (6 x 3 x 4 ft).
  • For ASTM B117 or MIL-STD-810 salt fog testing.

Prohesion Salt Fog Tester – Q-Panel Model SFMP/45.0

  • Cyclic salt fog/forced air drying.
  • Cabinet size approximately 0.75 x 0.6 x 0.75 m high (2.5 x 2 x 2.5 ft) .
  • ASTM B117, and ASTM G85 (Annex A.5).

Rain Test Facility

  • MIL-STD-810 blowing rain to 64 kph (40 mph), for up to 1.2 x 1.2 x 1.2 m (4 x 4 x 4 ft) packages.
  • 112 kph (70 mph) for up to 1.2 x 0.4 m (4 ft x 17 in) packages.
  • Drip and water tightness.


Solar Radiation Test Equipment

  • Up to 3.3 m2 (36 ft2) at 1120 W/m2 (355 Btu/ft2/hr), as per MIL-STD-810F, using up to 6 ARRI Lamp System,
  •  ltravitalux UV lamps
  • UV Accelerated Weathering Tester – Q-Panel Model QUV
  • Cyclic Ultraviolet light/condensing humidity, as per ASTM G-53, etc.


Hydrostatic Pressure Tanks

  • High Pressure – Pressure Products Model CRN 72088, 0.3 m dia., 1.22 m depth (1 ft dia. x 4 ft depth), to 103420 kPa (15,000 psi).
  • Medium Pressure – Modco Industries Model 7873, 0.95 m dia., 2.44 m depth (3 ft dia. x 8 ft depth, to 8270 kPa (1,200 psi).


Package Testing Equipment

  • Drop, impact, compression resistance, chemical compatibility, leakage, hydrostatic pressure, and Cobb Tests
  • Compliance with national and international standards for dangerous goods or infectious substance packaging, distribution hazards, etc.

Transportation Simulator – MTI/LAB Model 1250-SCMCLNTTR

  • 1.32 x 1.32 m (52 x 52 in) bed; 568 kg (1250 lb) maximum payload;
  • 1.25g maximum acceleration.
  • Four possible motions: circular synchronous, vertical linear, 30° out-of-phase, or non-synchronous.


Mechanical Test Machines

  • MTS 8,900 kN (2000 kip) fatigue rated (with resonant actuator) 
  • MTS 446 kN (100 kip) fatigue rated (with resonant actuator)
  • UTS 50 kN (11 kip)


Physical Test Equipment

  • Brookfield Viscometer with EX-200 bath. Range:  -30°C to +120°C (-22°F to 248°F)
  • Carver Laboratory Press
  • Cole-Parmer Melting Point Apparatus
  • Sartorius Analytical Balance


A.G.R.E.E. Chamber – Russells Technical Products Model RDV-61-30-30

  • Approximately 1.37 x 1.37 x 0.91 m high (54 x 54 x 36 in).
  • Interfaces with Electrodynamic Shaker for combined temperature, humidity, vibration & shock tests.
  • Temperature:  -73°C to +177°C (-100°F to +350°F ) at 10°C (18°F) change rate.
  • Humidity: 20% to 95% rh.

Humidity Chamber – Blue-M Model FR-386 PBX

  • Approximately 0.94 x 0.51 x 0.64 m high (37 x 20 x 25 in).
  • Temperature:  -18°C to +93°C (0°F to 200°F ).
  • Humidity 20% to 95% rh.