Standards Council of Canada

600-55 Metcalfe Street
Ottawa, ON K1P 6L5
Canada
Conseil canadien des normes

55, rue Metcalfe, bureau 600
Ottawa, ON K1P 6L5
Canada


SCOPE OF ACCREDITATION


ESL Technology Inc. 

Bldg 101-C, 101 Research Dr. 

 Dartmouth, NS 

B2Y 4T6

Accredited Laboratory No. 824

 (Conforms with requirements of CAN-P-4E (ISO/IEC 17025:2005))

CONTACT: Neil Richter 

 TEL: +1 902-464-9220

 FAX: +1 902-464-9251

 EMAIL: lawrence@esltechnologyinc.com 

 URL: www.esltechnologyinc.com 

FIELDS OF TESTING: Acoustics & Vibration, Mechanical/Physical 

SCOPE ISSUED ON: 2016-02-25 

ACCREDITATION VALID TO: 2020-02-25 


ELASTOMERS AND PROTECTIVE AND OTHER COATINGS

Plastics; Resins and Rubbers:

ASTM D3531 Standard Test Method for Resin Flow of Carbon Fiber-Epoxy Prepreg 

ASTM D3532 Standard Test Method for Gel Time of Carbon Fiber-Epoxy Prepreg 

ASTM D1781 Standard Test Method for Climbing Drum Peel for Adhesives 

ASTM D2344 Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates

ASTM D3039 Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials 

ASTM D3163 Standard Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading 

ASTM D3530 Standard Test Method for Volatiles Content of Composite Material Prepreg

ASTM D638 Standard Test Method for Tensile Properties of Plastics 

ASTM D695 Standard Test Method for Compressive Properties of Rigid Plastics 

ASTM D790 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials

 CSN EN 2557 Aerospace series - Carbon fibre pre-impregnates Determination of mass per unit area.


ELECTRICAL PRODUCTS AND ELECTRONIC PRODUCTS

ASTM B117 Standard Practice for Operating Salt Spray (Fog) Apparatus 

MIL-S-901 Shock Test, H.I. (High Impact) Shipboard Machinery. 

MIL-STD-167 Mechanical Vibrations of Shipboard Equipment

Only for: Type I Environmental

MIL-STD-810 Test Method Standard for Environmental Engineering Considerations and Laboratory Tests:

  - Method 514.6 Vibration (Procedures 1, 2 & 3 only)

  - Method 516.6 Shock (Procedures 1, 2, 3, 4, 5 & 6 only)

  - Method 500.5 Altitude

  - Method 501.5 High Temperature

  - Method 502.5 Low Temperature (Procedures 1 & 2 only) 

  - Method 507.5 Humidity 

 RTCA DO-160G Environmental Conditions and Test Procedures for Airborne Equipment

   -Sections 1, 2 & 3

   - Sect 4 , Temperature and Altitude

   - Section 5, Temperature Variation

   - Section 6, Humidity

   - Section 7, Operational Shocks and Crash Safety (Procedure 1 Only)

   - Section 8, Vibration 


Chantal Guay, ing., P. Eng.

Vice President, Accreditation

Standards Council of Canada Accredited Laboratory No. 824 

Services 

Date: 2016-02-25 

Number of Scope Listings: 16

SCC 1003-15/1019 

Partner File #0

Partner: SCC